Two stage blower fan to give up to 5kW of heat.
Added to any water heater system, this unit is great for fitting into a step void, or a cupboard base, for example, to give extra heat when required.
Can connected too a water filled heating system (Webasto/Eberspacher for exaqmple) or to the engine cooling system, to extra heat when required. Basically, it is the same principle as a vehicles cabin heater.
Fascia can be changed to an outlet hood with ducting ports to connect to 60mm ducting, or can be painted to blend in with its surroundings.
A three position switch will also be required to control the fan speed (available seperately).
When used with a Webasto heater, the unit can be wired in to start approximately twenty minutes after the heater has been switched on, to allow the circulatiing water temperature to warm up before the blower unit will start. This way only warm air will be circulated instead of cold.
Main Features
Heating Power |
5.5 kW |
Airflow |
250 m³/h |
Electrical consumption |
16 W |
Noise level |
48 dB |
Weight |
2 kg |
Ventilation speed |
2 |